APPLICATION

Danish Concrete Hardener greatly improves hardness and durability of concrete. It should be applied directly on new and old concrete surfaces without adding water or any other product. On fresh newly poured concrete surfaces, Danish Concrete Hardener should be applied after final troweling. On old existing concrete surfaces, Danish Concrete Hardener should be applied after cleaning the concrete surface, if existing concrete is in bad condition, repair old surface before application. Danish Concrete hardener should be used constantly when making concrete floors, walls and blocks to give concrete maximum strength.  It helps prevent loss of moisture after concrete pouring, to provide high quality concrete hardening. Application Coverage per Liter

  • For New concrete floor surfaces: Can cover a range of approximately 4-9m2 per liter.
  • For Old concrete floors surfaces: Can cover from 2-6 m2 per liter.
  • For Concrete Blocks: Can cover approximately 15 m2 per liter.
  • For Plastered Walls: Can cover approximately 15 m2 per liter.

Note: Coverage rate depends on the quality of the concrete floor and or mixture.

Do It Yourself 

Download out booklet on how to apply Danish Concrete Hardener